What is 1000 945 55

Wheelchair lifting platform MB1000, lifting height up to 1000/945 * mm * when installed in a pit

MB1000 wheelchair lifting platform

General information about the MB1000:

  • Wheelchair lifting platform MB1000 manufactured in accordance with the Machinery Directive 2006/42 / EC with a corresponding EC declaration of conformity, no TÜV approval required
  • Operation via dead man's control
  • Area of ​​use outside & inside
  • Load capacity up to 300 kg
  • Dead weight approx. 300 kg
  • Lifting height when installed in a 55 mm deep pit adjustable up to a maximum of 945 mm
  • Lifting height for installation without a pit adjustable up to a maximum of 1,000 mm
  • External dimensions (L x W): 1,650mm x 1,190mm
  • Usable width on platform 830 mm
  • Platform length 1,650 mm
  • Drive-on height 55 mm
  • Electrical connection 230V / 16A
  • Speed: approx. 1.5 cm / s
  • Temperature range - 25 ° C to + 40 ° C
  • Drive type: simple scissor lift construction with electric spindle lift motors
  • Noise development max. 60 dB (A)
  • Concealed components hot-dip galvanized, electro-galvanized and, if necessary, painted

Stage material:

  • Outer sheets made of polished stainless steel K240, quality 1.4301
  • Concealed components made of hot-dip galvanized steel, electro-galvanized and, if necessary, painted
  • Platform floor and access ramp made of AIMg3 aluminum checker plate
  • Plastic bellows / apron with plastic reinforcement for optimal stability and durability

Stage dimensions:

  • Total width: 1,190 mm
  • Wide platform / passage width: 830 mm
  • Platform length: 1,650 mm
  • Length with drive-on plate: 1,950 mm
  • Height of side panels (when closed): 1.013mm
  • Construction height 55 mm

Drive:

  • 2x 24V DC motors 0.3 kW
  • Speed ​​approx. 1.5 cm / s
  • 30% ED with self-releasing brake
  • Support means spindle with secured support nut

Service:

  • Control panel on the platform with call buttons ø 50mm with key switch.
  • Call button in a stainless steel housing for the upper and lower stop, button ø 50mm with key switch. Fastening either on-wall or in-wall.
  • Degree of protection of the buttons used: Front side IP69K -> water & oil tight. Vandalism protection class: IK08 "Cannot be destroyed by lighter flames, blows and graffiti on the touch surface"

Security:

  • Dead man's control for all available controls
  • The access ramp also serves as roll-off protection
  • Underride protection in the form of a bellows / folding apron made of plastic
  • Encryption of the control points with 40mm profile half cylinder (optional Euro key)
  • Protection of the platform on the valley side with an automatically opening / closing barrier. Material stainless steel round tube, ø 30mm
  • Fall protection upper stop with door:
  • Manual 1-leaf revolving door with door pillars
  • Material: stainless steel
  • For mounting on the edge of the platform
  • Equipped with an automatic door opener
  • Stop side optionally DIN left or DIN right
  • Electrically monitored by door contact switch and automatic door locking
  • Dimensions: height 1000mm, passage width 900mm
  • Material: door frame made of stainless steel with door leaf filling made of satined polycarbonate

On-site services:

  • Foundation according to plan
  • Access to the installation site with correspondingly wide entrances and paved paths
  • Electrical connection 230V, 16A at least C-Automat
  • Sanding wall pedestal side
  • For delivery with door: platform edge without protrusions, the floor must be suitable for holding dowels, concrete anchors or the like, must not be hollow in the area of ​​the fastening of the door frame

deliver and assemble according to the manufacturer's instructions.

Make:

Wheelchair lift MB1000 or equivalent

Herkules Liftwerk

www.liftwerk.de